SKF NKXR35 bearing

35x47x30

The SKF deep groove ball bearing is a double-sealed ball bearing with C3 clearance and has a deep-groove geometry for high speeds and supporting both radial and axial loads. This bearing has C3 radial internal clearance for radial slack between the inner and outer rings that is greater than CN (normal) to compensate for thermal expansion.



Needle roller / thrust rolling bearings NKXR 35

Bearing number : NKXR 35

Size (mm) : 35x47x30

Brand : SKF

Bore Diameter (mm) : 35

Outer Diameter (mm) : 47

Width (mm) : 30

Bearing dimensions and specification in SKF catalogue:

Fw - 35 mm

D - 47 mm

C - 30 mm

C1 - 12 mm

C2 - 9 mm

d - 35 mm

D1 - 52.1 mm

r1,2 - min. - 0.6 mm

da - min. - 47.7 mm

ra - max. - 0.6 mm

rb - max. - 0.3 mm

di - 30 mm

F - 35 mm

Bi - 20 mm

Basic dynamic load rating, radial direction - C - 24.6 kN

Basic static load rating, radial direction - C0 - 45 kN

Basic dynamic load rating, axial direction - C - 29 kN

Basic static load rating, axial direction - C0 - 93 kN

Fatigue load limit, radial direction - Pu - 5.6 kN

Fatigue load limit, axial direction - Pu - 9.2 kN

Reference speed - 2800 r/min

Limiting speed - 5600 r/min

Mass bearing - 0.157 kg

Inner ring - IR 30x35x20

Bearing NKXR 35 Bearing NKXR 35

Bearings similar to SKF NKXR35 bearing


Contact Details

ROOM 19/F AiLeiw 532
Basheki.sepwer.Hong Kong
Tel: 00852 - 30696864
Fax: 0086 18626329562

E-mail: [email protected]